Difference between revisions of "Beginners Guide for 2.x"

From AwkwardTV
Jump to: navigation, search
(Option 2: Keep it standard (but use some useful free software))
(Option 1: Hack it!)
Line 15: Line 15:
 
You can make a Patchstick following instruction here: [[Take2patch]]
 
You can make a Patchstick following instruction here: [[Take2patch]]
  
And then following the update procedure for AFP and USB storage here: [[Take 2 Full Update]]
+
And then following the update procedure for AFP and USB storage here: [[Take 2 Full Update]]. Alternatively (and seemingly more successful) use the safe updater from [http://forum.awkwardtv.org/viewtopic.php?f=6&t=1262 NitoTV]. This does it for you. You should be able to use an external drive once this is done AND if you use the code at the bottom of [http://wiki.awkwardtv.org/wiki/Enable_USB_Storage#Move_iTunes_media_to_USB_Drive this page], be able to use it for external storage (not tested personally).
  
 
Note that only a few plugins work (Sapphire not yet - it's is though a work-in-progress). See here for list of Take 2 working plugins: [[ATV2-Compatible Plugins]].
 
Note that only a few plugins work (Sapphire not yet - it's is though a work-in-progress). See here for list of Take 2 working plugins: [[ATV2-Compatible Plugins]].

Revision as of 11:15, 9 March 2008

Beginners Guide for Take 2

Useful Dongle

My ATV is downstairs in the living room and my Mac is upstairs. Legging it up and down the stairs all the time is not ideal, especially if you're trying to work out something that went wrong, so I bought one of these little devices so I could plug in the ATV to a spare monitor next to my iMac.

For the Beginner

I think there are two ways to go with 2.0 and from iTunes 7.6.1.

Option 1: Hack it!

If you followed the 1.0 Guide, you might feel like you can try a 2.0 hack - with a bit less hand holding.

You can make a Patchstick following instruction here: Take2patch

And then following the update procedure for AFP and USB storage here: Take 2 Full Update. Alternatively (and seemingly more successful) use the safe updater from NitoTV. This does it for you. You should be able to use an external drive once this is done AND if you use the code at the bottom of this page, be able to use it for external storage (not tested personally).

Note that only a few plugins work (Sapphire not yet - it's is though a work-in-progress). See here for list of Take 2 working plugins: ATV2-Compatible Plugins.

So, you'll lose Sapphire, but gain HD rentals, AirTunes, the new menu system, etc. Although let's be honest, the new menu system is not nearly as good as the old one, but the features contained therein are a great step forward.

Option 2: Keep it standard (but use some useful free software)

You can do more than you think with a standard ATV and a few free utils and spare yourself plenty or time, effort and expense. Check out The Alternative to Hacking page.

Goodbye From Me

I have a 10 week old baby boy and that's a big part of me choosing option 2 and giving up on 2.0 hacking. Someone else, please feel free to take over. Thanks for all the positive comments (notably, when I did the 1.0 Guide). I'll be around. --Simplicity 00:04, 8 March 2008 (CET) aka Peter Alexander (peter dot alexander _at_ mac dot com)

For those of us trying to compile this page

I am currently gathering up everything being posted in the forums into a simple procedure to allow the following:-

1) Start with Stock ATV with standard update 2.0 firmware

2) Patchstick 2.0 to allow SSH

3) Enable AFP

4) Enable external USB storage

5) Install plugins

Useful Links

If anyone would like to offer useful forum / wiki links or quotes, please do so below.

Install Perian

Take2patch

ATVFiles for ATV2 thread

The whole big ATV2 release discussion thread

Good Stuff on AFP in the above thread

Making at 2.0 Patchstick Forum Thread

How to make a SSH patchstick for Take2 Wiki Page

AFP alternative for windows. For me does Winscp the drag / drop job: http://winscp.net/eng/download.php

That pesky master.passwd error when using the Patchstick - how do you mount Patchstick root again?

Error at Patchstick creation like cp: cannot overwrite directory /Volumes/Patchstick-root/ ......

Run this in the Terminal:-

    sudo rm -R /Volumes/Patchstick-root