Difference between revisions of "AppleTV 2"

From AwkwardTV
Jump to: navigation, search
(3rd Party Apple TV iOS Software)
m (Dock Connector: Clarifiying, adjusting 1st person perspective.)
Line 27: Line 27:
 
The AppleTV 2 has a predetermined spot on the logic board for an Apple Dock Connector. This is most probably here for Apple's in-house developer units.
 
The AppleTV 2 has a predetermined spot on the logic board for an Apple Dock Connector. This is most probably here for Apple's in-house developer units.
  
The default Apple TV hardware does not allow you to use the HDMI port and the micro-USB port at the same time. Adding an iPod dock to the side of the enclosure will bypass this hardware restriction, allowing both hacking and viewing.
+
The default Apple TV hardware does not allow you to use the HDMI port and the micro-USB port at the same time, as they're too closely placed. Whether appropriately modified plugs that fit will allow this to be usable is currently unknown. Adding an iPod dock to the side of the enclosure should bypass this hardware restriction, allowing both hacking and viewing.
  
 
An image of the dock connector spot can be seen in a teardown by iFixit:
 
An image of the dock connector spot can be seen in a teardown by iFixit:
Line 35: Line 35:
 
*[http://www.sparkfun.com/commerce/product_info.php?products_id=8035iPod Dock Female]
 
*[http://www.sparkfun.com/commerce/product_info.php?products_id=8035iPod Dock Female]
  
Soldering to the dock terminals on pins 2 and 3 failed to get analog audio out. I don't know if it's a hardware or software limitation. I was able to produce sound out the HDMI port but no sound came out of the dock pins corresponding to audio out on other iOS devices.
+
Soldering to the dock terminals on pins 2 and 3 failed to get analog audio out. It's not currently known if this is a hardware or software limitation. It's been possible to produce sound out of the HDMI port, but no sound comes out of the dock pins corresponding to audio out on other iOS devices.
  
 
Pins 5, 7, 9, 14, 16, 18, 22 and 24 are connected to Ground.
 
Pins 5, 7, 9, 14, 16, 18, 22 and 24 are connected to Ground.

Revision as of 22:40, 24 October 2010

Background / Introduction

The second-generation Apple TV, a digital media receiver made and sold by Apple Inc., was unveiled during an Apple press conference on September 1, 2010. It is a small form factor network appliance designed to play digital content originating from the iTunes Store, Netflix, YouTube, Flickr, MobileMe or any Mac OS X or Windows computer running iTunes onto an enhanced-definition or high-definition widescreen television, and will accept music, video and photo streams from other iOS devices using AirPlay in 4.2. The second generation sold 250,000 in its first two weeks available.

Packaged iOS Software

Lowtide is the application running on the AppleTV. It is essentially a rewrite of the "BackRow" Application from the previous generation AppleTV to adopt the standards that Apple set for the iOS Platform. BackRow shares it's roots with the Mac "FrontRow" application, a system that provides the "ten-foot UI" that is expected from TV Set-top Boxes. This interface handles all user interaction, video playback, streaming, etc. It has been shown to run on other iOS hardware such as the iPod Touch.

Specifications

Size: 23 mm (0.9 inches) (h), 98 mm (3.9 inches) (w), 98 mm (3.9 inches) (d)
Weight: 0.6 pounds
I/O: HDMI, Optical audio, 10/100 Mbps Ethernet, IR receiver, Micro-USB port

  • Apple A4 Processor (K4X2G643GE, same as in iPad)
  • Samsung K9LCG08U1M 8GB NAND Flash chip
  • Broadcom BCM4329XKUBG 802.11n Wi-Fi/Bluetooth/FM chip (Same as in iPad)
  • 256 MB RAM
  • Apple 343S0479 1005 005BB
  • M430 F2350 TI E03K C0GP G4
  • SMSC 8710A-EZK B1023-A2 (10/100 Ethernet Transceiver)
  • TXC MUGT 27.000
  • TXCPCUM3 50.000
  • Apple 338S0891

Dock Connector

The AppleTV 2 has a predetermined spot on the logic board for an Apple Dock Connector. This is most probably here for Apple's in-house developer units.

The default Apple TV hardware does not allow you to use the HDMI port and the micro-USB port at the same time, as they're too closely placed. Whether appropriately modified plugs that fit will allow this to be usable is currently unknown. Adding an iPod dock to the side of the enclosure should bypass this hardware restriction, allowing both hacking and viewing.

An image of the dock connector spot can be seen in a teardown by iFixit:

Here is a link to some female dock connector parts:

Soldering to the dock terminals on pins 2 and 3 failed to get analog audio out. It's not currently known if this is a hardware or software limitation. It's been possible to produce sound out of the HDMI port, but no sound comes out of the dock pins corresponding to audio out on other iOS devices.

Pins 5, 7, 9, 14, 16, 18, 22 and 24 are connected to Ground.

How to DFU Mode

Step 1: Plugin your Apple TV to computer with a MicroUSB Cable (Power will not be required, as the AppleTV can be powered via the USB Bus).

Step 2: Immediately hold the "Menu" & "Play" buttons iTunes prompts you that "an Apple TV in recovery mode has been detected".

Note: You must use the new Apple IR Remote (Aluminum) to do this. The previous (Plastic) model does not have the "Play" button, preventing you from being able to enter DFU Mode.

NitoTV

NitoTV is a standard set of tools to enhance the functionality provided by the Apple TV Platform.

Releases of NitoTV Take 2 for the previous generation Apple TV hardware acted as an Installer for additional packages that did not come standard on the OS X 10.4-based OS, as well as provided additional Frappliances (Applications that integrated with the AppleTV's Backrow Application).

Currently, the NitoTV Take 3 release for the current generation Apple TV provides a Weather Forecast and an RSS Reader application within it's own Frappliance wrapper. It's developer has stated that these first two applications were intended as Proof-of-Concepts, as well as serve as a testbed for further development for the iOS-Based Apple TV.

For more information regarding the state of development, as well as get an installation guide for installing NitoTV to your AppleTV 2, please see: http://wiki.awkwardtv.org/wiki/NitoTV_Take_3

Useful Links

Jailbreak Status

PwnageTool 4.1.2 uses the limera1n exploit to jailbreak as well as auto-install Cydia, SSH and afc2.

Currently, Cydia's Graphical User Interface has not been ported to the Backrow Frappliance model, however the Command Line tools such as 'apt-get' are fully intact and functional.

As all iOS-devices are concerned, SSH exposes full access to your devices. As such, it is important to make sure that you change your root password ('alpine') as soon as possible.

Currently, the vast majority of GUI Applications provided by Cydia will not run on the AppleTV due to missing libraries and lacking a launcher. Several developers have committed to updating their Applications to run on the AppleTV and make use of the Remote as a valid Input Device.

Tests show that Applications that support a hardware keyboard (Bluetooth or the iPad Dock) can make use of the Apple IR Remote.

Greenp0ison also makes use of the limera1n exploit. RC5 is being prepared to have AppleTV support. Preview screenshots have been posted by the Chronic Dev Team showing altered menus and a software injector. Preview

Older Developments:

  • SHAtter Exploit: pod2g's SHAtter exploit was shown by MuscleNerd and posixninja as capable of jailbreaking the AppleTV. Due to George Hotz's (Geohot) release of Limera1n, it was decided that this exploit will be with held for use on future generation hardware.
  • Limera1n: George Hotz (Geohot) released the limera1n exploit; capable of jailbreaking the AppleTV. The current iteration of his jailbreak solely installs afc2 and the Cydia application. As Cydia does not have a GUI that is capable of running on the AppleTV, users are incapable of installing additional packages to their AppleTVs if they use this jailbreak method. This limitation is expected to be resolved in the near future via an updated limera1n release.

We will do our best to keep this page neutral because of the controversy surrounding limera1n and the various development teams, please if you add to this page, do the same.

Jailbreak Issues

There have been reports that users utilizing the PwnageTool 4.1.2 Jailbreak will loose their WiFI Settings following a reboot. While these reports have been confirmed to happen, the behavior is not guaranteed for all users.

3rd Party Apple TV iOS Software

  • Fire Core is a software development group that provides a standard set of tools useful to those who wish to Jailbreak their AppleTVs. They have controversially packaged the AppleTV Patchstick software that was available in conjunction with other freely available and in-house applications to release their aTV Flash application. In doing so they provided a standardized and supported experience with Jailbroken AppleTVs.

Firecore has announced that they are actively working on the development of an update to their aTV Flash application, aTV Flash black and an SDK to enable others to develop for Lowtide.

Developer Notes

The above sample code requires Dustin Howett's beigelist frappliance. This section initially housed a change that was necessary to get the beigelist frappliance to work, with the latest updates from DHowett, the changes are no longer needed. Additional developer notes will be added to this section pending their noteworthiness.

Follow this page for any updates, it will be more inclusive of information time pending, as it arises.

Notes from nunux77

To be able to run your test application, like the NitoTV "Hello World" example, you need to install Dustin Howett's beigelist. I had some issues and do dirty fix to compile the lastest version, but you can now get directly the cydia package on NitoTV repository to save some solving time about compilation. Just follow the instruction to install NitoTV, and it will install beigelist as a dependency.

Thank a lot to Nito, Dustin and the community for your support.